| | |  | Docking & Anchoring Products | Home » » » » Hull Hugr Pwc Fender Black | | | | | | | Description: | | Docking a PWC has never been safer with the introduction of the Hull Hug PWC fender. Engineered specifically for PWC's, it hinges in the center to better protect PWC bodies from docks designed for bigger boats. It hooks under the rub rail with a molded acetyl hook integrated into the back of the fender. If your PWC has them, you’ll want to connect the top of the fender to a cleat or ski eye with the adjustable strap and vinyl dipped steel hook provided. If not, simply thread the strap though the rubber block provided and place it inside the PWC’s storage compartment, then shut it. The block anchors the fender strap perfectly and will not damage the body. We recommend 2 fenders per PWC. Fits all PWC's. | | | Features: | |
• Docking your PWC has never been easier or safer with the introduction of the HULL HUGR PWC Fender
• Engineered specifically for PWCs
• Hinges in the center of your PWC to better protect the body from docks designed for bigger boats
• Easily hooks under the rub rail with a molded acetyl hook integrated into the back of the fender
• Two fenders per PWC are recommended
| | | Product Details: | | | Product Length:
| 0.0 inches | | Product Width:
| 0.0 inches | | Product Height:
| 0.0 inches | | Product Weight:
| 1.2 pounds | | Package Length:
| 11.6 inches | | Package Width:
| 5.7 inches | | Package Height:
| 4.2 inches | | Package Weight:
| 1.3 pounds | | Average Customer Rating:
|  based on 8 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 8 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
7 of 7 found the following review helpful:
PWC Hull HuggersJun 24, 2008
By William C. Boozer, Jr.
"WCB"
Probally as good as it comes for PWC's. Vinyl cover could be more durable, but ease of fastening is very good.
2 of 2 found the following review helpful:
 pwc protectionNov 21, 2010
By Abdulaziz Almodahka
"Aziz"
this fender is one of the very few designs that actually provide good protection for small boats as well as jet skis.
2 of 2 found the following review helpful:
Good product!Oct 26, 2010
By J. Turner
Attaches easily to my Jet ski. Stays secure when moving and well made. No noted problems.
1 of 1 found the following review helpful:
Jet ski Hull huggerJan 23, 2012
By Popeye
Great piece of kit, very easy to use even when on the water and saves damaging your ski hull against high ramp docks. A must for all jet ski owners!
1 of 1 found the following review helpful:
 Jetski UseSep 06, 2011
By Reza Gholamipour
I ride my jetski to Catalina island from Dana Point in Southern California. The dingy dock at the island is of the worst quality you can expect. It beats the ski to the extend of chipped paint, not only scratches.
I bought 6 of them to protect all around the ski. The straps that come with them are hard to use, I would suggest using bongy cords for faster installation. Use short ones to put very good tension on the HullHugr.
I was semi happy with the results.
1. It is very hard to attach the hull hugr to the front of the hood while you are on the ski, almost impossible unless you are a very thin tall guy and can lay on your steering to reach front of the ski. My ski is Yamaha FX HO Cruiser (06).
2. Upon impact with dock and rubbing against your ski, the material actually leaves small scratches on the ski.
3. It does get released and rolls up on hard impacts due to water surging.
I am not too happy with it but there are not much better alternatives out there.
If you want it for a descent dock, then just get two and it will work but if you are in a similar situation like me, don't waste your money!
See all 8 customer reviews on Amazon.com
| | |
|
![How to Play Keyboards [VHS]](http://g-ecx.images-amazon.com/images/P/A0000000.01-._SS_SCZZZZZZZ_.jpg "How to Play Keyboards [VHS]")
