| | |  | Gun Accessories | Home » » » » » Handall Jr. Grip Sleeve - Hogue | | | | | | | Description: | | Hogue rubber grips are molded from a durable synthetic rubber that is not spongy or tacky, but gives that soft recoil absorbing feel, without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene and results in a much superior grip. The material we use does not come apart or deteriorate and is resistant to all solvents and oils used around firearms. Hogue Grips give you a lasting precision fit and durability that will provide years of dependable service. The flexibility of our materials and molding process has allowed us to produce superior rubber grips with features that out perform all other makes. | | | Features: | |
• Small-size pistol grip sleeve with single finger groove
• Special shape hugs the contours of your gun
• Unique cobblestone texture; ambidextrous Palm Swells
• Resistant to gun oils and solvents; no lubrication required
• Fits most small pocket pistols and some pistol grip rifles
| | | Product Details: | | | Product Weight:
| 2.0 Ounces | | Package Length:
| 8.1 inches | | Package Width:
| 4.4 inches | | Package Height:
| 0.5 inches | | Package Weight:
| 0.15 pounds | | Average Customer Rating:
|  based on 142 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 142 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
38 of 39 found the following review helpful:
 Nice grips for a small gunJan 17, 2010
By GMo
These are quality grips. They stick in your hand and provide a little extra oomph for that smaller gun. They help tame recoil well. That said, however, they aren't truly universal grips for small autos. I purchased these for the Ruger LCP. They are too long, and the finger hump is too high on the grip - meaning it's shoved against the trigger guard. However, I was able to flip the grip (install it upside down) and cut off some of the excess length with a box cutter (as well as around the mag release). And voila, an instant fit. The finger hump was also placed down lower on the grip where it should be. Glad I bought, but you'll have to make some adjustments to fit it on the LCP.
15 of 15 found the following review helpful:
 Makes your firearm melt in your hands.Aug 05, 2010
By R.Piskami
"<(o.O)>"
I am currently using this for my Kel-Tec P11 (9mm).
Pros:
-Rubber grip allows for a very firm, tight, and comfortable grip.
-Fits the Kel-Tec P11 perfectly with no trimming needed.
Cons:
-Hard to get on and reposition.
Thoughts:
In order to get this on to your firearm I recommend that you soak this in HOT (not boiling) water for a few minutes to let the rubber relax and stretch. Then check to make sure your firearm is unloaded (I took my slide off). Then start on one side and get it about an inch onto the grip, holding that side firmly (you could use a vise maybe) stretch the rubber to the other side of the grip. After about 5 tries I succeeded. Once it is on both sides it is only a matter of working each side up a bit at a time. If you have a NON-Metal firearm, I recommend adding a bit of warm water while sliding it up. Let the rubber rest when you are done and you will be able to shoot in no time.
11 of 11 found the following review helpful:
ExcellentSep 13, 2010
By dt405gt
The entire process went perfect. Shipped when they said and I received it in the time frame allotted. Fits perfect on my Kel-Tec PF9. I recommend this seller. 5 stars
8 of 8 found the following review helpful:
Great Grip for the Ruger LCPJun 02, 2010
By D. Nguyen
"Secret Asian Man 007"
I brought this grip because I wanted to improve the feel of my Ruger LCP. I went to the range and shot about 150 rounds through the gun before having this grip on. My hand was sore and bruised. With the grip on, the difference is very noticeable. It's more comfortable, the guns fits better in my hand.
I recommend this grip to anyone with a Ruger LCP. You have to so some trimming of the grip since it's universal. But after the trimming, it fits great and works wonderfully.
7 of 7 found the following review helpful:
Hogue Handall Jr- great for Taurus PT 709Jul 10, 2010
By Peleg
Anyone who owns a Taurus PT709 Slim has probably found that the grip is... well, a bit slim for most of us. After a brief internet search, I found that several people recommended the Hogue Handall Jr grip sleeve- so I ordered it on Amazon and it arrived a few days later. I followed the directions and it was relatively easy to install. The grip is definitely better now. The only improvement would be a grip sleeve that you didn't have to trim for shorter handled sub-compacts.
See all 142 customer reviews on Amazon.com
| | |
|
