Microphones & Accessories
|Home » |
Gooseneck Mic Stand
Die Casting Iron U Shape Stand; Adjustable Positioning; Microphone Holder Included; Base Spread: 5.6" X 6.75"; Weight: 2.6 Lbs; Dim: 5.5"L X 7"W X 11.8"H
Die Casting Iron U Shape Stand
Mic Holder Included
Weight: 2.6lbs - Base Spread: 5.6 in. x 6.75 in
Dimensions: L 5.5'' X W 7'' X H 11.8
|Average Customer Rating:
|| based on 161 reviews|
Average Customer Review:
( 161 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
21 of 21 found the following review helpful:
Not As ShownNov 27, 2012
By Paul Ramone
This microphone stand is cheap, and it does a good job holding a large microphone steady. However, I purchased this stand so the microphone could be extended forward towards me, perhaps hanging a little over the desktop. Unfortunately, the gooseneck as pictured on Amazon is much longer than the one I received. My gooseneck is approximately 7" long; the one pictured in the ad is at least 12" long (See the user pictures I posted at the top of the listing).
I did try a 12" gooseneck with this stand, and it was unstable with my 1-pound microphone. So, Pyle probably decided it was too unstable and substituted a shorter gooseneck. Amazon should update the picture to show what you will actually get. Just be aware the stand might not be as adjustable as you might think.
Someone else pointed out that the base casting looks like a science experiment. I couldn't agree more! Even the Romans made prettier castings than this!
13 of 15 found the following review helpful:
The Best Desktop Mic StandJul 28, 2010
By Amazon Customer
I sing live over the internet, and use a microphone on a stand. Most mic stands have a heavy, round base. The problem with these is, if the mic is extended toward you on a boom or gooseneck, the stand can tip over. The Pyle Pro stand is unique with its weighted, u-shaped base. This places the center of gravity toward the back of the stand - the result is you can have a mic extended toward you with no worries of tipping.
The only caveat is that the included gooseneck is the only support you can use for your mic. Unlike other stands that use a standard thread in the base for various supports, the thread in the base of this unit is the same as that you normally would use to attach a microphone to.
7 of 8 found the following review helpful:
Difficult to move & flimsy holderAug 23, 2011
By Tyler L
I admire the fact that the base is so heavy, allowing it to not tip over, but the snaking metal is hard to maneuver and point in the direction you want. The other problem I have with it is that the mic grip doesn't seem to want to stay in place. Unless you get it at just the right angle, it just pivots forwards or backwards of its own accord. It's good in concept, but I'd like to see it be more flexible and have a sturdy grip on the mic.
6 of 7 found the following review helpful:
Great for Speech RecogntionJan 22, 2011
By R. D. Collins
I bought this to use with Dragon NaturallySpeaking speech-recognition software. It works a lot better than a typical desktop stand as it gets the mic close to my mouth despite the presence of the computer's keyboard between me and the mic stand. I was concerned that it might not be heavy enough to do that without tipping over as I'm using it with a Sennheiser 431-II mic, which is a relatively large and heavy microphone. However, it has proved to be up to the task, even with the head of the mic extended nearly a foot forward from the tip of the base, provided that the mic is directly in front of the base (it will tip if moved to either side of the base). It's very stable.
My only quibble is the roughness of the casting of the base, but that's purely looks and doesn't effect function. The gooseneck is of very good quality, but the mic clip is just OK -- I replaced it with the larger and sturdier clip that came with my Sennheiser mic.
Note that as of January 2011, Amazon was selling this mic stand for only $7.00, considerably less than what other sellers were charging. To find the Amazon price, look under "other sellers," add it to your cart, and then go to your cart and click on the item. It's annoying that Amazon now makes you do that to find the best price. Or try clicking here: [...]
6 of 7 found the following review helpful:
Gooseneck Mic Stand is good, but won't hold a wireless mic as the holder is too tightMar 21, 2011
This gooseneck mic stand is good, but it won't hold a wireless mic as the holder is too tight. I'm sure it would be fine for a standard mic though. The mic holder on the stand can be stretched to hold the thicker wireless mic's with a little tweaking. And if you leave a wireless mic in the holder once you get it in, it does become easier to remove & insert the wireless mic after a while. But if you don't leave the mic in the stand when you store it, it will go back to being too tight again. The screw and nut for tightening the swivel on the mic holder does not stay tightened for very long. All and all, it's a good stand for the price though.
See all 161 customer reviews on Amazon.com