Paper & Plastic
|Home » |
Dixie DS115 5 Oz. Wall Mount Pull Type Cold Cup Dispenser
The Dixie DS115 wall-mount pull-type dispenser can hold approximately 100 Dixie-style 5-oz. drinking cups for organization and is made from stainless steel. The dispenser is 19 x 3.5 x 4.25 inches (H x W x D). (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) Cups are loaded into the top of the gravity-fed dispenser and accessed by pulling from the bottom. The dispenser housing is made from stainless steel, which is corrosion resistant and easy to clean. Wall-mount style keeps dispenser accessible and saves counter space. A mounting bracket is included.
Georgia-Pacific manufactures tissue, pulp, paper, packaging, building products, and paper-related chemicals. The company, founded in 1927, is headquartered in Atlanta, GA.
What’s in the Box?
- Dixie DS115 cup dispenser
- Wall mounting bracket
Wall-mount pull-type dispenser keeps drinking cups organized and accessible
Holds approximately 100 Dixie-style 5-oz. cups
Dispenser is made from stainless steel, which resists corrosion and is easy to clean
Wall mounting bracket included
Dispenser is 19 x 3.5 x 4.25 inches (H x W x D)
|Average Customer Rating:
|| based on 59 reviews|
Average Customer Review:
( 59 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
14 of 15 found the following review helpful:
Excellent supplierAug 22, 2008
By Desert Hiker
The item is exactly as it appears online. Works fine, and the stainless steel matches the rest of my kitchen decor. It has a much greater capacity than the plastic cup dispensers sold in mass market outlets. As an aside, the response from the supplier is excellent. I had ordered other things from Amazon as part of the same order. The Amazon items were shipped on Amazon Prime. This item was delivered one day before the items shipped direclty from Amazon.
6 of 6 found the following review helpful:
Outstanding cup dispenserOct 12, 2010
By Betty LCOOS
I finally found a cup dispenser for our church that was sturdy and would hold up with heavy use. This cup dispenser is terrific. You can regulate the cup size. We use the 5 oz. setting for our water cooler. I know it will last for many years. I plan to buy another for our new building. Thank you Amazon for providing such an excellent product.
6 of 6 found the following review helpful:
perfect dispenserMar 31, 2010
By H. Welch
This well made stainless steeel cup dispenser will be the last dispenser I' ever need,nice addition to my stainless steel appliances in kitchen. A'must have for any famliy, Helga W. in OKlahoma
5 of 5 found the following review helpful:
Works for 3 oz cupsJun 19, 2013
By Fred Bloggs
It works for 3oz cups, but that information is hard to find, so i wasnt sure when I purchased it if it would work. It works very well at holding and releasing the cups when needed. Its adjustable and definitely works for bigger cups and thats one reason it only got 4 stars: Its a little on the big size for 3oz cups, but we have it attached on the far side of the medicine cabinet which hides the fact its a little oversized.
The other reason it only got 4 stars is that it has a few welding dimples maring the finish. If your bathroom is "perfect", this will be a detraction. The placement also hides the hose clamp adjusting screw. If your bathroom is "average" (frequently used and a little messy), you wont notice it. MUCH better looking than the old cheap plastic Dixie cup holders!
The finish is polished to a shine. So while the description says stainless steel, it will be almost chrome shiny!
3 of 3 found the following review helpful:
Translation lost across the pondMay 01, 2014
Installation was a no-brainer. However, instruction sheet states "Mount bracket(s) 8 1/2 " apart". Only one bracket is required and supplied. But, you get two packs of screws (2 each per pack). Only 2 screws needed for a single bracket. Top cap is protected with skin wrap, which is nicely polished. Sides of the cap are coated with sticky grease. Most likely a lubricant when the top cap was stamped. After removing the film with a firm scrubbing, you are left with an unpolished rim of stainless steel, with distracts from a nicely finished product. The 'hose clamp" adjustment at the bottom of the dispenser requires near full
tightening to accommodate the Dixie cup 5oz cold cups. This leaves an offset but is not that noticeable. Just wondering if anyone is "watching the store".
See all 59 customer reviews on Amazon.com