|Home » |
DEWALT DW920K-2 1/4-Inch 7.2-Volt Cordless Two-Position Screwdriver Kit
Fast, efficient, and versatile, the DEWALT DW920K-2 1/4-inch 7.2-volt cordless two-position screwdriver kit features heavy-duty construction, the convenience of variable speed, and a 7.2-volt battery pack for quick charging and longer run time in small fastening applications. It's ideal for professional use and comes with two batteries, a charger, bit, and kit box for easy storage and portability.
|2 1/4-Inch 7.2-Volt Cordless Two-Position Screwdriver Kit |
At a Glance:
- Provides 80 inch-pounds of maximum torque output
- Variable speed (0 - 500 RPM) and reversing trigger switch for versatility
- Includes batteries, charger, bit, and kit box
- Weighs 3.5 pounds for easy handling
- Backed by a limited three-year warranty; 90-day money-back guarantee
80 Inch-Pounds Max Torque for Heavy-Duty Fastening Applications
Fasten screws in hard-to-reach places with this two-position screwdriver.
The angle grip allows for comfortable handling in a wide range of tasks.
Compact and powerful, this DEWALT DW920K-2 1/4-Inch 7.2-volt cordless two-position screwdriver kit provides 80 inch-pounds of maximum torque output for a superior power-to-weight ratio in a variety of fastening applications.
Variable Speed for Improved Control and Versatility
As versatile as it is robust, the DW920K-2 offers the convenience of variable speed (0-500 RPM) to match the correct speed to the job at hand, as well as a reversing trigger switch for fastening and pre-drilling into wood, plastic, and light-gauge metal.
Adjustable Handle for a Better Grip
Designed to be as user-friendly as it is efficient, the DW920K-2 features an adjustable two-position handle that allows for operation as both in-line tool and an angled grip for tight spaces and overhead work, increasing your project flexibility. And a heavy-duty metal hinge provides secure and sustained two-position lock.
Minimize Downtime and Boost Productivity
To minimize downtime, an industrial, quick-release, hex-shank chuck allows for quick screwdriver-bit change and prevents bit run out. For added convenience, both a 7.2-volt battery pack and an electric brake enhance productivity.
Dimensions and Warranty Information
At 3.5 pounds, the DW290K-2 1/4-inch 7.2-volt cordless two-position screwdriver kit is lightweight enough for all-day jobs without excessive stress on wrists and hands. It's also backed by a limited three-year warranty, 90-day money-back guarantee, and one-year free service contract.
What's in the Box
One DEWALT DW920K-2 1/4-inch 7.2-volt cordless two-position screwdriver, one-hour NiCad charger, two 7.2-volt compact NiCad batteries, screwdriver bit, and kit box.
With 80 inch-pounds of maximum torque output, this screwdriver will stand up to a variety of job site tasks.
80 inch-pounds of maximum torque output provides superior power-to-weight ratio in variety of fastening applications
Adjustable two-position handle allows for operation as both in-line and pistol-grip
Variable speed and reversing trigger switch provides 0-500 RPM for fastening and pre-drilling
Industrial quick-release hex-shank chuck allows for quick screwdriver bit change and prevents bit run out
7.2-volt battery pack allows for longer run time and charges in one hour
|Average Customer Rating:
|| based on 637 reviews|
Average Customer Review:
( 637 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
158 of 163 found the following review helpful:
Great Cordless Screwdriver!!!Jan 09, 2005
I own numerous cordless drills and cordless screwdrivers. This one really fills the gap. Light weight and strong power, for its size. I do a lot of electrical work, which entails drywall repair amongst other things. It has enough power to drive drywall screws in, yet small enough to get into those small places. I wouldn't sheet rock a room but it's great for small jobs. Attaching cabinet hinges, electrical work and driving hex nuts, it works great in all applications. Really beats the pants off of the B&D 3 volt screw drivers. The clutch has excellent range. At the 1 setting you can drive screws into a switch face plate without breaking the plate. The higher numbers correspond almost exactly to the release pressure of my other DeWALT drills.
I knocked off one star due to the poor quick release design. By the way, it hasn't been fixed. When you push the sleeve back, towards the screw driver, it releases the bit. Like others have said, when you bump it or put it in your tool belt the bit can release. It hasn't been a huge problem, just an annoying issue. The problem is that there is a small spring that helps release the bit. So it shoots it across the room. It really doesn't make any sense, since their impact drivers have the release mechanism going in the opposite direction. That said, I would buy this again and recommend it to anyone. Hopefully, some day, DeWALT will act on these reviews. For the price this is a great deal. The batteries have long run times and the charger is the latest 3 mode version which allows you to leave the battery in the charger all the time without damaging the battery. In fact that is what they recommend, keep one in the charger at all times. It charges, conditions and then maintains a trickle charge after that. I wish that I would have purchase this item long ago. Have fun.
Update: I have now been using this tool for about 6 months. It still works flawlessly. I would like to add a note on the quick release. I think that DeWALT's thinking on the way the bit releases is for ease of use and quick action. Typically if you are using this tool, you will be changing from flat head to phillips again and again. By tapping the release the bit quickly pops out and to attach a new one you just shove it in. If, like on their impact driver, you had a locking mechanism it would be more difficult to release and install the bit. This is supposed to be for light duty work. This cordless screwdriver is now the first tool into my bag for any project. I can't imagine leaving home without it.
56 of 58 found the following review helpful:
DeWalt Cordless ScrewdriverApr 08, 2001
By Richard N
I'm remodeling my garage. One of the many tasks is putting up sturdy wall shelving to hold heavy tools and tool boxes, and putting up drop down ceiling racks to hold 4x8 sheets of plywood, sheet rock, etc.
I have been using the DeWalt Cordless Screwdriver to attach the shelving to my garage studs and rafters with 3 inch wood screws.
I am more than impressed with the power this little screwdriver has. Screwing 3 inch screws into a pair of 2x4's by hand or by using a drill and Phillips bit is not an easy task. The DeWalt however, has the power to get the job done easily. I don't have to soap the screws either, a task that was necessary with my old Craftsman cordless screwdriver.
I set the clutch to 15 for these tough jobs. When the clutch engages, the DeWalt sounds like an air ratchet. The thing just oozes power.
The 1 hour charger works as advertised. My depleted battery packs are completely recharged in under an hour.
The DeWalt two position handle is a welcome enhancement from my inline Craftsman cordless screwdriver. I find that I am using the pistol grip postion almost exclusively.
One feature that took some getting used to is the location of the forward, lock, reverse switch. Its location is more suitable for a left handed person than for a right handed person.
To say the very minimum, I am very satisfied with my DeWalt. Next to my table saw I would rank my cordless screwdriver as my most important and useful tool.
102 of 113 found the following review helpful:
DeWalt DW920K-2Dec 17, 2002
I actually like everything about Dewalt's DW920 screwdriver with exception of the 1/4" quick release chuck. The chuck does work as designed. However, there is one very important detail that Dewalt seems to have missed, and I just can't believe that no one else has mentioned it.
The chuck should have been designed with a lock position requiring the user to push the collar forward as opposed to pulling it back to release, such as with an air hose coupling. Even just putting stiffer springs in the chuck to increase the force needed to push the collar back might make all the difference, because with the current design, if the chuck collar even slightly bumps into anything at all, it moves back, releasing the bit and letting it fall out. This includes when you drop the screwdriver into your tool bucket along side other tools or slide it bit down into your tool pouch or drill holster.
As stated previously, I really like the overall design of the DW920 because it is hands down the best cordless screwdriver out there. But, unfortunately for my needs, this one exceedingly frustrating and productivity-killing feature undercuts the entire tool and relegates the otherwise superior DW920 from what would easily be a "first choice" in the field tool to a "last choice" bench work only tool.
If Dewalt would only improve the design of the chuck, I would never leave the shop without it.
Update: I was able to satisfactorily fix the problem I had with the chuck releasing the bit with only incidental contact by installing an O-ring behind the chuck collar.
55 of 60 found the following review helpful:
WOW. There's the rest but here's the bestJan 01, 2001
This is simply the best cordless screwdriver around. With a drill you either have too much torque, speed and size. Having a power screwdriver is a necessary piece of equipment for any homeowner.
I had always suffered with stripped screw heads or insufficient torque. No more - not with this baby. Balance is perfect, controls are terrific. I was really (pleasantly) surprised to find the chuck is a rapid load self ejecting chuck. This is really a necessity in a screwdriver (and probably in drills too - DeWalt hope you are reading this....).
The torque adjustment is really great. Adjustment steps are very nicely spaced throughout the torque range. I.e. you don't have to worry about one setting being too much and the next being too little. You get a nice range throughout 15 settings. I have used this for light jobs like wall switch trim plates with no problem where I used to routinely crack them with other drivers. Also with tough driving into thick oak etc.. with no problem and no stripping.
My only complaint is that the battery shape makes the tools somewhat awkward to use in the straight position. However, this is the only problem and nothing that I believe detracts from the tool overall.
Having owned several black and decker cordless ones and having looked at the skil, panasonic and others. This tool leaves them in the dust ... and at a discount too! (Panasonic I have seen here for $139 or so).
Get it. You won't regret it.
20 of 20 found the following review helpful:
This is the BestJan 27, 2001
I've owned a Milwaukee cordless screw driver for years and it recently broke. Most people you talk with say the Milwaukee is the standard for electrical contractors. Then I discovered this new DeWalt 920K. It offers everything the Milwaukee offers plus two things which I always felt were missing with the Milwaukee. Two batteries for continuous use, and a whole lot more power. The trade off is its a little bigger and heavier. But it still fits in my tool bucket and well worth the advantages. You can even use it for light weight drilling!
See all 637 customer reviews on Amazon.com