| | |  | Gun Accessories | Home » » » » » Bipod Bench Rest 6-9" - Harris Engineering | | | | | | | Description: | | Lowest Of The Bipods. Most Useful For Shooting Off The Bench. Pistol Shooters Prefer This Rest. Bore High From Approximately 6 To 9 Inches. | | | Features: | |
• This Bipod is most Useful For Shooting Off The Bench
| | | Product Details: | | | Product Length:
| 4.5 inches | | Product Width:
| 10.5 inches | | Product Height:
| 2.0 inches | | Product Weight:
| 0.6 pounds | | Package Length:
| 10.6 inches | | Package Width:
| 3.7 inches | | Package Height:
| 1.3 inches | | Package Weight:
| 0.6 pounds | | Average Customer Rating:
|  based on 12 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 12 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
11 of 11 found the following review helpful:
awesomeApr 26, 2011
By azgunrunner
i went through 3 fake harris type bipods that all fell apart from stripped screws or s&^t parts. Finally, i decided that i want a proven bipod, which is notorious for being the best. Harris is that. its a solid feel, there are no jiggling parts. perfect for my rem 700 .308
6 of 6 found the following review helpful:
Harri Bipods Rock!Jun 17, 2010
By M. Rapp
I put my new bipod on my 91 30 Mosin Nagant, was hitting steel plates at 300yrds all morning and my forend hand never felt a thing! Ready for the Crows Nest!!
4 of 4 found the following review helpful:
 RecommendJul 19, 2011
By Tom Berenger
After getting two cheap bipods from Amazon and having them literally fall apart in my hands I decided to hazard a name brand.
Overall the build quality and finish are excellent. It performs all it claims and installs in seconds.
I had to take a star away due to the arm adjustment system. I prefer the type my cheapies had wherein depressing the clamp deployed the spring-loaded arms, releasing it locked the arms. With this bipod you have to turn a screw-head, manually adjust the arms, then re-tighten it.
Overall it's very nice, but like it's recommended usage advises, it should only be used on a bench rest or at the range, not for hunting or MIL/LE/GOV.
3 of 3 found the following review helpful:
(5/5) Works Well!Apr 04, 2012
By T. Ho
Like others before me who reviewed this bipod, I also went through a few cheap bipods before hand hoping to save money. In the end, I ultimately bought this bipod which works very well with my AR-15 and Rem 700. This 6 to 9 inch bipod works great at the bench rest and on the floor.
Pro(s):
- Very sturdy (this bipod NEVER "accidentally" collapsed even when shooting .308's)
- Easy to adjust (stays between 6" to 9"; quick snap at 6" and 9")
- Fast retraction
- Minimal maintenance if any at all
- Minimal slippage at the base (rubberized base tips)
- Easy to install (will require an adapter if your rifle does not have a swivel sling stud; e.g. AR-15's)
Con(s):
- After shooting for a while (over a year now with this bipod), the tightening screw will begin to loosen as you shoot (I address a fix for this below)
Note(s):
- Made in the USA
- Harris Engineering also makes a swiveling bipod (Harris Engineering S-BRM Hinged Base 6 - 9-Inch BiPod)
Suggestion(s)/Recommendation(s):
- Regarding the con of this bipod where the bottom tightening screw gets loose after a while, I simply applied a small drop of Henkel Corp 209728 Loctite Blue Threadlocker or Permatex 24200 Threadlocker Blue to create some resistance on the screw's threads. After letting it dry, I went to the range and I find that it stays on quite well and I can still unscrew it if I want to.
- Just like any bipod with spring tension, be careful not to keep your fingers near the hinges or springs as it will pinch you severely
Thank you for reading this review!
1 of 1 found the following review helpful:
Good product for the priceJul 05, 2011
By usmc82
This is an excellent small bipod that will fit securely on most rifles equipped with a sling swivel stud. It fits securely (adjustable tension), attaches easily and removes just as easily; I bought it with the idea of leaving it attached to one rifle but I have moved it back and forth between three. I recommend checking the height you want and ensure you get the right size, though. This is perfect for most rifles and most bench rest firing points.
See all 12 customer reviews on Amazon.com
| | |
|
