| | |  | Safety & Security | Home » » » » 3M 7500 Series Reusable Half Facepiece, Model 7502. Size: Medium | | | | | | | Description: | | Advanced silicone material provides a softer feel on the face. Unique adjustment design helps reduce pressure points on the face for comfort. Unique head harness design adjusts easily so user has the option of wearing the respirator in either traditional or drop - down modes. Made from soft, resilient silicone and heat - resistant plastics. Valve design helps make breathing easier, and helps reduce heat and moisture build - up in the facepiece. | | | Features: | |
• Softer & More comfortable than the 3M 6000 Series
• Unique adjustment design helps reduce pressure points on the face for comfort
• Made from soft resilient silicone and heat-resistant plastics
• Looking for Filters: 3M #2071 or 3M #6001 or 3M #6009
• Also needed: 3M #5N11 Prefilter For 3M Respirator And 3M #501 Prefilter Retainer For 3M Respirator
| | | Product Details: | | | Product Length:
| 10.0 inches | | Product Width:
| 7.0 inches | | Product Height:
| 5.75 inches | | Product Weight:
| 0.17 pounds | | Package Length:
| 10.3 inches | | Package Width:
| 7.3 inches | | Package Height:
| 3.0 inches | | Package Weight:
| 0.4 pounds | | Average Customer Rating:
|  based on 38 reviews |
| | | | Customer Reviews: | |
Average Customer Review:
 ( 38 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
49 of 50 found the following review helpful:
The BEST Respirator Solution for WeldersJun 19, 2009
By MeredithJL
"MeredithJL"
I've been using 3M's 6000 series halfmask with P100 2091 cartridges. I was still inhaling a lot of gas and smoke because the 6000 series has a vent right in the middle and the only thing separating me from the outside air is a thin rubber membrane in the vent. Not so with this respirator. Notice the shield on the center section. It covers that vent, and it makes a huge difference. I also switched to the P100 2097 cartridge, which has the Nuisance level Organic Vapor protection. Boy, what a difference! I am now unable to smell ANY welding fumes while welding. This respirator is also made of a thicker silicone and has a much more comfortable fit than the 6000 series. All in all, a little more money for a LOT more safety, and it all fits under my welding helmet perfectly.
18 of 18 found the following review helpful:
I can't smell a thing!May 10, 2009
By Hal 9000
"Hal"
....and that's exactly what is supposed to happen when you use a 3M 7500 Respirator....Easy to fit...Comfortable (to a point...sometimes there is bit of conflict when I am wearing eye protection, earmuff style hearing protection and the respirator), but whatever very minor discomfort I experience, I know that my lungs are being protected. I did a lot of research, but what sealed the deal for me was the recommendation of Marc Spagnolo (aka the "Wood Whisperer").
16 of 16 found the following review helpful:
Great for WeldingAug 30, 2010
By a really obsessed Q.T. luver
After researching respirators and reading many reviews, I decided to go with this one after reading "MeridethJL's" review. It really does work great. I cant smell a thing and I feel very safe welding now. I also do alot of grinding and it also protects me from breathing in all the particals. It is also very comfortable. I went with the #2097 cartridges. I would recommend this to anyone who does welding or grinding.
14 of 14 found the following review helpful:
Now I know why the reviews are so positiveApr 09, 2011
By Jason Neal
This is an excellent mask, far more comfortable than any other mask I've tried, and none of the usual problems with fogging up my safety glasses when I'm in the workshop. I also have pretty bad pollen allergies and I'm miserable if I work in the yard on a Saturday without protection. I graduated to this one after using a simple mask with replaceable cotton (?) filters. It worked well enough against sawdust and pollen but it was uncomfortable to wear so I didn't tend to use it as much as I should. It seems like with life expectancies getting progressively longer, more and more people end up with some form of cancer. I love my woodworking hobby but I don't want to risk my lungs for it.
By the way, it wasn't apparent to me that the round filters like the 2091 and 2097 attach directly to this facepiece without the need for a housing or cartridge of some type. None of the pictures of the filters I saw while browsing showed the back side where the fitting is located. That is convenient but I would prefer a rigid housing around the filters to help protect them from damage. That's just a personal preference.
10 of 10 found the following review helpful:
Breathing much easierApr 14, 2010
By J. Brown
I also purchased this mask after seeing a review by "The Wood Whisperer". I currently do not have a dust collection system at my shop and have been using a standard dust mask, which works, well, as well as a dust mask can, it offers some protection, but not much. The 3M 7500 series works GREAT! No air enters through the perimeter as there is a nice sized rubber "gasket" that seals it up between your face. Air is exited through the bottom, so no more steamed up glasses, and it is comfortable to wear. And best of all, it's inexpensive. Great product.
See all 38 customer reviews on Amazon.com
| | |
|
